Hard Disk Drive - Panasonic CF-72 Series Reference Manual

Hide thumbs Also See for CF-72 Series:
Table of Contents

Advertisement

Hard Disk Drive

To change your hard disk drive, contact Panasonic Technical Support
Tab
(A)
2
CAUTION
To customers:
To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk. The hard disk is extremely sensitive to
shock. In addition, static electricity could later affect some internal components.
Installing/Removing the Hard Disk
(For technicians at Panasonic Technical Support)
1
Power off your computer
Do not shut down using the standby or hibernation mode.
Disconnect the AC adaptor.
2
Remove the main battery pack
3
Removing the hard disk
2
2
Installing the hard disk
2
4
Insert the battery pack and then put the battery pack
cover back into place
(
While pulling the tab in the direction indicated by the arrow (A),
lift the hard disk.
Remove the hard disk.
Insert the hard disk as shown in the figure.
Put the hard disk in place.
Connect the hard disk (via the hard disk connector) to the com-
puter.
(
"Starting Up/Shutting Down")
(
page
28)
page
28)
53

Advertisement

Table of Contents
loading

Table of Contents