Panasonic CF-72 Series Reference Manual page 59

Setup Utility
Boot Menu
1. [SuperDisk Drive]*
2. [Hard Disk Drive]
3. [CD Drive]*
The default order is as follows:
[SuperDisk Drive]
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
NOTE
Boot First Menu
The device for starting up the Operating System can also be selected during computer start-up.
After the computer is turned on, the device selection display will appear when
pressed while "Press <ESC> to enter Boot First Menu" is shown. (When selecting [CD Drive]
from Boot First Menu, if the disc has not been set in the CD-ROM/DVD-ROM drive, it is not
possible to start up from the disc.)
When the setting of the [Boot] menu is changed, the selection screen display will also change.
(
Exit Menu
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Parameters
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
1
* 1
2
* 2
[Hard Disk Drive] [CD Drive].
"Starting Up/Shutting down")
Exit the Setup Utility and save your
changes to CMOS.
Exit the Setup Utility without saving your
changes to CMOS.
Set the default settings. The password
remains.
This item may not be displayed when
starting up the Setup Utility with the User
Password.
Load previous values from CMOS for all
Setup items.
Save your changes to CMOS.
This item is shown even when the SuperDisk drive is not in-
stalled or [SuperDisk Operation] is set to [Disable].
The description for "CD Drive" applies to the DVD-ROM drive.
and ,and then press F6 .
and ,and then press F5 .
ESC is
59