Installing The Fuel Tank; Installing The Discharge Tunnel Plug; Self-Tapping Screw; Fuel Tank - Toro 22195 Operator's Manual

3

Installing the Fuel Tank

Parts needed for this procedure:
2

Self-tapping screw

1

Fuel tank

1

Hose clamp

Procedure
1. Slide the plastic clips, on the front of the fuel tank,
onto the fuel tank mount (Figure 5).
1. Fuel tank plastic clip (2)
2. Secure the bottom of the fuel tank to the fuel tank
bracket by installing the self-tapping screws from the
bottom. Torque the screws to 40 to 50 in-lb (4.5
to 5.6 N-m).
3. Insert the hose clamp onto the fuel line from the fuel
filter (Figure 6).
g018740
Figure 5
1. Fuel filter
2. Fuel line
4. Slide the end of the fuel line onto the fuel tank fitting
(Figure 6).
5. Secure the fuel line to the fuel tank with the hose clamp
(Figure 6).
4
Installing the Discharge Tunnel
Plug
Parts needed for this procedure:
1

Discharge tunnel plug

Procedure
1. Open the discharge door by pulling forward on the
handle and moving it rearward (Figure 7). Hold the
discharge door handle to prevent the spring-loaded
door from closing while you insert the plug.
8
4
1
2 3
Figure 6
3. Hose clamp
4. Fuel tank
g01804