Filling The Crankcase With Oil; No Parts Required - Toro 22195 Operator's Manual

Figure 7
1. Discharge door handle
2. Since the plug is slightly wider than the discharge
tunnel opening, rotate the plug clockwise slightly while
inserting it (Figure 7).
Note: Ensure that the arrow on the plug decal points
upward.
2. Plug, rotated clockwise
3. Push the plug all the way in until the spring clip on the
bottom of the plug clicks into place, locking the plug
securely into the discharge tunnel (Figure 8).
1. Spring clip
4. Release the discharge door handle to lock the top of
the plug.
5

Filling the Crankcase with Oil

No Parts Required

Procedure
The engine crankcase is shipped without oil. The engine
crankcase can hold 22 ounces (0.65 liters) of oil. Use only
high-quality SAE 10W-30 weight detergent oil that has the
American Petroleum Institute (API) service classification SH,
SJ, or equivalent.
Before each use, ensure that the oil level is between the lower
limit and upper limit marks on the dipstick (Figure 9).
1. Dipstick
2. Upper limit mark
9
Figure 8
Figure 9
3. Lower limit mark