Lincoln Electric CLASSIC 300G 10659 Operator's Manual page 25

Lincoln electric welder user manual
Table of Contents

Advertisement

E-7
PROBLEMS
(SYMPTOMS)
Engine Stops During Operation and
the Engine Protection Light Does
Turn On. (Flashing)
White or Blue Smoke.
Dark Smoke
Faulty Charging
Starter Motor does not run.
Engine Knocking.
Lack of Power.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
Observe all Safety Guidelines detailed throughout this manual
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
1. Lack of Coolant.
2. Loose or slipping fan belt.
3. Damaged fan belt.
1. Excess engine oil.
2. Too low viscosity of the engine
oil.
1. Excess injection.
2. Clogged air cleaner.
3. Faulty function of the engine.
1. Loose fan belt.
2. Faulty wiring.
3. Faulty battery.
4. Worn out alternator brush.
1. Loose or damaged wiring.
2. Low Battery voltage.
3. Damaged starter motor.
1. Poor grade of Gasoline.
2. Spark advance to far.
1. Carbon deposits causing pre-
ignition.
2. Incorrect timing.
CLASSIC 300G
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
CAUTION
RECOMMENDED
COURSE OF ACTION
E-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents