To view more details of the programme (except Analogue)
●
1) Select the programme with
2) Press
to view
– Press again to return to TV Guide.
To exit TV Guide
●
EXIT
= Note =
When this TV is turned on for the first time, or the TV is switched off for
●
more than a week, it may take some time before TV Guide is completely
shown.
DVB and Analogue channels are displayed on the same TV Guide screen.
●
D
means DVB channel and
programme listings for Analogue channels.
In Other Sat. / Satellite mode, the channel list will appear when pressing
●
GUIDE.
Timer Programming
The Timer Programming menu allows you to choose programmes that you
want to remind watching or record to the USB HDD. At the correct time, the
TV will tune to the correct channel even if the TV is in Standby mode.
1. Select the forthcoming programme or channel with
press
OK
to access
2. Select
USB HDD Rec.
To check / change / cancel a timer programming event
●
Recording
LED will turn to orange in Standby mode if
●
To return to TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
record from the time you finish the timer programming event setting.
is displayed on the TV Guide screen if Timer Programming is set
●
from TV Guide.
If a programme exists in both HD and SD broadcast, the
●
screen will be displayed. Select HD or SD broadcast with
press
OK
to set.
/
/
A
means Analogue channel. There will be no
/
Reminder
with
Timer Programming
Editing timer programming
with
/
and press
will be displayed if HD broadcast is set.
- 46 -
/
/
/
/
and press
OK
to set
Timer Programming
OK
to set
USB HDD Rec.
Timer Options
/
and
is set.
to
/
and