Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
1. Display
TV Guide
2. Select the forthcoming programme and press
– You can also set a timer event pressing
To check / change / cancel a timer event
●
Recording > Timer Programming > Editing Timer Programming
LED turns to orange in Standby mode when
●
To return to
TV Guide
●
BACK/RETURN
If you select the current programme, a confirmation screen asking
●
whether you want to watch or record the programme appears. Select
Timer Programming
the time you finish the timer event setting.
is displayed on the TV Guide screen if
●
from
TV
Guide.
= Note =
Not valid in Analogue
●
Timer Programming
●
received via the signal from the broadcaster or service provider.
No other channels can be selected while recording of
●
is in progress.
When recording programmes to the USB HDD, be sure to format the USB
●
HDD and enable it to record in
Recording > USB HDD setup
To set timer programming events of this TV on the network equipment
●
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
with GUIDE.
and press
OK
only works reliably if correct time information is
USB Device
- 93 -
OK
to access.
.
Timer Programming
to set
USB HDD Rec.
Timer Programming
Timer Programming
Setup.
is set.
to record from
is set