Panasonic TX-L42DT65B Ehelp page 61

■
Edit DVB / Analogue Channels
To swap the channel position number (logical channel number)
●
1) Press (green) to edit
2) Enter the new position number with numeric buttons, and press
(green) to store
To retune each channel
●
(red)
– Only for the revealed channels
To rename the channel name (Analogue)
●
1) Press (blue) to edit
2) Enter characters (maximum 5 characters) with
numeric buttons, and press
3) Press BACK/RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue mode, edit VCR.
●
■
Create the channel list for Other Sat. / Satellite
Create your channel list of Other Sat. / Satellite for viewing from all the found
channels to exclude the duplicated channels or to reduce the number of
channels. And then you can select your desired channels easily.
1. Select a channel to list from
To change the category
●
(red)
2. Press OK to add it to
To add consecutive channels to the list at once
●
1) Press
2) Make the channel block with
To delete the selected channel from the list of
●
(green)
To exclude the selected channel from the list of
●
OK
(Manual Tuning)
OK to set
to store
Channels Found
Channels for Viewing
(yellow)
- 61 -
/ /
with /
/ and press OK to add
Channels Found
Channels for Viewing
/ or