Adjusting The Parking Brake - Yamaha Raptor 90 YFM90RA 2011 Service Manual

Table of Contents

Advertisement

ADJUSTING THE PARKING BRAKE

ADJUSTING THE PARKING BRAKE
1. Check:
• parking brake cable end length
2. Adjust:
• parking brake cable end length
a. Loosen the locknut
b. Loosen the locknut
c. Turn the adjusting nut
d. Tighten the locknut.
e. Slowly turn the adjusting bolt clockwise until
f. Turn it 1/8 counterclockwise.
g. Tighten the locknut
After this adjustment is performed, lift the
rear wheels off the ground by placing a
block under the engine, and spin the rear
wheels to ensure there is no brake drag. If
any brake drag is noticed perform the
above steps again.
3 - 23
Out of specification → Adjust.
Parking brake cable end length
53.0 ~ 57.0 mm (2.09 ~ 2.24 in)
and adjusting bolt
.
until the specified brake cable end
length is obtained.
resistance is felt.
.
16 Nm (1.6 m•kg, 11 ft•lb)
WARNING
CHK
ADJ
.
in direction
or

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents