Table of Contents
Advertisement
A
B
a
FRONT BRAKES
2. Check:
• brake drum inner surface
Oil/scratches → Remove.
Oil
Scratches
EBS00442
INSTALLING THE FRONT BRAKES
The following procedure applies to both of the
front brakes.
Reverse the "Removal" procedure.
Note the following points.
1. Lubricate:
• brake camshaft
• pivot pin
Lithium-soap-based grease
NOTICE
_
During installation, lightly grease the brake
camshaft and the pivot pin. Wipe off the
a
excess grease.
2. Install:
• brake camshaft
• brake camshaft lever
• brake camshaft spring
TIP
• Install the brake camshaft so its punch mark
a
is positioned as shown.
• Align the punch mark in the brake camshaft
with the mark on the brake camshaft lever.
A
Left side
B
Right side
6 - 9
CHAS
Use a rag soaked in
lacquer thinner or
solvent.
Use an emery cloth (light
and even polishing).
14 Nm (1.4 m · kg, 10.1 ft · lb)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
