How To Install The Monitor On A New Computer - BenQ XL Series User Manual

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for
1. Follow the instructions in
When Windows starts, it will automatically detect the new monitor and launch the
New Hardware Wizard
Device Drivers
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check
Search for a suitable driver for my device
4. Check the option for CD-ROM drives (uncheck all others) and click
5. Look to confirm that the wizard has selected the correct name of your monitor and click
.
Next
6. Click
Finish
7. Restart the computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files
XL2420t
XL2420te
XL2420Z
XL2420TX
XL2420G
XL2720T
XL2720Z
26 Getting the most from your BenQ monitor
How to assemble your monitor hardware on page
. Follow the prompts until it displays the option to
.
.
XL2420T
XL2420TE
XL2420Z / XL2420ZE
XL2420TX
XL2420G / XL2420GE
XL2720T
XL2720Z / XL2720ZE
How to upgrade the monitor on an existing
option, and click
Suitable models
computer.
11.
Found
Install Hardware
.
Next
.
Next