Casio SE-G1 Manual page 26

[9] Key Test
[Function]
Tests if keys are recognized correctly. Each key is assigned with a hard key code. This test checks if
correct hard key cords are assigned. All keys except for l and y key may be tested.
Pressing y key will terminate the test.
[Operation]
Command : 9 4 k
(1) Press any key to display a hard key code assigned to the key on the 7-Segment.
[Example of Display on 7-Segment]
(2) To check if the number displayed on the 7-Segment is correct, refer to the Hard Key Code Chart.
(3) When all keys are tested, press y key to end the test.
Commands are printed out when the check ends.
[Hard Key Code Chart]
FEED 12
AC
07 08 09
04 05 06
01 02 03
00 11 13
[Print]
KEY
ESC
END
C 18 23
17 22
16 21
15 20
14 19
94
94
– 24 –
SE-G1/PCR-T273/SM-T274
28 32
27 31
26 30
25 29
24