Yamaha GX-700 Service Manual page 13

8. Removal of Pick-up Head
a. Remove the Gear A in Fig. 12.
b. Pull out the Sled Shaft and remove the Pick-up Head
in Fig. 12.
Pick-up Head
Sled Shaft
Sled Shaft
Stopper
Check that the disc table height is as specified
below.
Disc Table
9. Removal of Cassette Mechanism
Remove 4 screws ( !5 ) and then pull out the Cassette
Mechanism in Fig. 13.
10. Removal of Main Motor
Remove 2 screws ( ! 6 ) in Fig. 13.
Gear A
11. Removal of Pinch Roller
Detach the hook and then remove the Pinch Roller
in Fig. 14.
12. Removal of Head Ass'y
a. Remove 1 screw ( !7 ) and then remove the Relay
P.C.B. in Fig. 14.
b. Remove 2 screws ( !8 ) and then remove the Head
Ass'y in Fig. 14.
* Perform the adjustment of azimuth after installing
the Head Ass'y.
Fig. 12
!5
!5
Fig. C
Head Ass'y
Hook
Pinch Roller (L)
GX-700/GX-700VCD
!6
!6
Pinch Roller (R)
!8 !7 !8
!5
!5
Fig. 13
Hook
Fig. 14
12