Instructions For Connecting/Disconnecting Cables - Fujitsu PRIMERGY RX100 S4 Server Operating Manual

Hardware installation
4.6 Instructions for connecting/disconnecting
cables
V
CAUTION!
Make sure you read the documentation for the external devices before
connecting them.
Do not connect or disconnect data cables during a thunderstorm.
When removing a cable, always hold it by the plug not by the actual
cable.
Connect and disconnect the cables in the order described below.
Connecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the grounded shockproof sockets.
Ê Plug all cables into the server and peripherals. Secure the data transmission
cable connections (e.g. nut retention).
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cables into the grounded shockproof sockets.
Disconnecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the grounded shockproof sockets.
Ê Unplug all data communication cables from the utility sockets.
Ê Loosen the nut retentions on the connector housings and disconnect the
corresponding cables from the server and from the peripherals.
RX100 S4

Instructions for connecting/disconnecting cables

Operating manual 47