Configuration Without Serverstart - Fujitsu PRIMERGY RX100 S4 Server Operating Manual

Configuring the server
5.3.3

Configuration without ServerStart

Configuring IME (RAID level 1)
The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality.
I
A separate utility is available to the controller for IME configuration. For
further information, refer to the "Integrated RAID for SAS User's Guide"
(on the ServerBooks DVD under "Controllers").
You find further information in the Technical Manual for the system board (see
"Literature" on page
You can perform the RAID configuration in the BIOS POST using CTRL+C or,
after installing the operating system, using GAM (Global Array Manager) or
ServerView RAID.
Configuring the onboard SATA controller
The server is equipped with an onboard SATA controller, which supports RAID
levels 0 and 1 with LSI SATA Software RAID.
I
The controller has its own configuration utility. More detailed information
may be found in the "Embedded SATA Software RAID for ICH7R User's
Guide" manual (on the ServerBooks DVD under "Controllers").
You find further information in the Technical Manual for the system board (see
"Literature" on page
You can perform the RAID configuration in the BIOS POST using CTRL+M or,
after installing the operating system, using GAM (Global Array Manager) or
ServerView RAID.
60
77) and on the driver diskettes provided.
77) and on the driver diskettes provided.
Operating manual
Starting up and operation
RX100 S4