Connecting A Digital Tv Stb (Set Top Box); Connecting A Pc; Using Digital Audio Output - Sharp Aquos LC-40LE820X Operation Manual

Preparation

Connecting a Digital TV STB (Set Top Box)

You can use the INPUT4 (ARC)/INPUT5/INPUT6/INPUT7 (HDMI) or the INPUT1 (component)/INPUT2 (composite)
terminals when connecting to a Digital TV STB (Set Top Box), and other audiovisual equipment.
NOTE
• When using a DVI-HDMI adaptor or conversion cable, input the Audio Signal from the AUDIO terminal of AUDIO IN. (See page
50.)
When using HDMI cable
(commercially available)

Connecting a PC

You can use the INPUT3 (PC) terminal when connecting to a
PC. (See page 54.)
14
40LE820X_en_au.indd 14 40LE820X_en_au.indd 14
When using component cable
(commercially available)
STB
(Set Top
Box)
Y P P
B R
(C ) (C )
B R
STB (Set Top Box)

Using Digital Audio Output

It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM or Dolby Digital audio
outputs from the terminal.
ANALOGUE
RGB
AUDIO
(L/R)
PC
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
R – AUDIO – L
Optical
fi bre cable
(commercially
available)
2010/06/18 16:11:17 2010/06/18 16:11:17