Before Turning On The Power - Sharp AQUOSLC-42GX3H Operation Manual

Preparation

Before turning on the power

Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
Connecting the antenna cable
1
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Detach the terminal cover of 1 and 2 .
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Connecting external devices
2
See pages 9 to 10 for connecting external equipment, such as a VCR and DVD player.
Connecting the AC cord
3
AC outlet
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
Bundling the cables
4
1 Insert the cable clamp in the hole on the TV as shown.
2 Detach the cable cover attached to the TV.
1 Unfasten the upper side.
2 Pull from the lower side.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
8
Antenna cable
(commercially available)
To antenna
terminal
AC cord
1
TV (rear view)
Cable clamp
3 Bundle the cables and
attach the cable cover.
1 Insert the lower side.
2 Attach the upper side.
2