ECOTHROTTLE SWITCH
The EcoThrottle
all loads are turned off or disconnected. When appliances are turned
on or reconnected, the engine returns to the proper speed to power
the electrical load.
If high electrical loads are connected simultaneously, turn the
TM
EcoThrottle switch to the OFF position to reduce voltage changes.
When using the DC output, turn the EcoThrottle
position.
ON:
Recommended to minimize fuel consumption and further
reduce noise levels when no load is applied to the
generator.
OFF:
The EcoThrottle system does not operate.
PARALLEL OPERATION OUTLETS
These outlets are used for connecting two EU1000i generators for
parallel operation (see page
kit (optional equipment) is required for parallel operation. This kit can
be purchased from an authorized Honda generator dealer.
TM
TM
system automatically reduces engine speed when
TM
21
PARALLEL OPERATION OUTLETS
O
O
F
F
F
F
O
O
N
N
). A Honda approved parallel operation
TM
switch to the OFF
TM
ECOTHROTTLE SWITCH
15