Lincoln 2010 MKT Owner's Manual page 28

Lincoln 2010 automobile owner's guide
Hide thumbs Also See for 2010 MKT:
Table of Contents

Advertisement

Instrument Cluster
MAX # OF KEYS LEARNED (if equipped) — Displayed during spare
key programming, after a fourth Intelligent Access Key is programmed or
upon entering spare key programming mode with four Intelligent Access
Keys already programmed to the vehicle.
MYKEY ACTIVE DRIVE SAFELY — Displayed at startup when
MyKey™ is in use. Refer to MyKey™ in the Locks and Security chapter
for more information.
KEY COULD NOT PROGRAM — Displayed when an attempt is made
to program a spare key using two existing MyKeys. Refer to MyKey™ in
the Locks and Security chapter for more information.
VEHICLE SPEED 80 MPH MAX — Displayed when a MyKey™ is in
use and the Admin has enabled the MyKey speed limit and the vehicle
speed is 80 mph (130 km/h). Refer to MyKey™ in the Locks and
Security chapter for more information.
SPEED LIMITED TO 80 MPH — Displayed when starting the vehicle
and MyKey™ is in use and the MyKey speed limit is on. Refer to
MyKey™ in the Locks and Security chapter for more information.
CHECK SPEED DRIVE SAFELY — Displayed when a MyKey™ is in
use and the optional setting is on and the vehicle exceeds a preselected
speed. Refer to MyKey™ in the Locks and Security chapter for more
information.
VEHICLE NEAR TOP SPEED — Displayed when a MyKey™ is in use
and the MyKey speed limit is on and the vehicle speed is approaching
80 mph (130 km/h). Refer to MyKey™ in the Locks and Security
chapter for more information.
TOP SPEED MYKEY SETTING — Displayed when a MyKey™ is in
use and the MyKey speed limit is on and the vehicle speed is 80 mph
(130 km/h). Refer to MyKey™ in the Locks and Security chapter for
more information.
BUCKLE UP TO UNMUTE AUDIO — Displayed when a MyKey™ is in
use and Belt-Minder is activated. Refer to MyKey™ in the Locks and
Security chapter for more information.
ADVTRAC ON MYKEY SETTING — Displayed when a MyKey™ is in
use when trying to disable the AdvanceTrac system and the optional
setting is on. Refer to MyKey™ in the Locks and Security chapter for
more information.
BLIND SPOT SYSTEM FAULT (if equipped) — Displayed when a
fault with the blind spot information system has occurred. Contact your
authorized dealer as soon as possible.
28
2010 MKT (mkt)
Owners Guide, 3rd Printing
USA (fus)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents