Lincoln 2010 MKT Owner's Manual page 154

Locks and Security
Note: For all vehicles with remote start installed, it is possible to
program all 'real' keys as MyKeys™, in which case, you will need to use
your remote start system to reset all MyKeys™ as Admin keys by doing
the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow steps 1-4 in the Disable MyKey™ section.
Troubleshooting
Condition
Can't create a MyKey™
Cannot program the MyKey™
optional settings
154
2010 MKT (mkt)
Owners Guide, 3rd Printing
USA (fus)
Potential Causes
• Key in the backup slot is already a
MyKey™.
• Key in the backup slot is the last
remaining Admin key (there always has
to be at least one Admin key).
• Intelligent Access Key (if equipped)
not in the backup slot (for vehicles with
push button start).
•SecuriLock Passive Anti-Theft
System is disabled or in unlimited mode
• Vehicle has been started using a
remote start system that is programmed
as MyKey™. Refer to Using MyKey™
with Remote Start Systems section.
• Key in the backup slot is a MyKey™
• No MyKeys™ are programmed to the
vehicle. Refer to Create a MyKey™
section
• Vehicle has been started using a
remote start system that is programmed
as MyKey™. Refer to Using MyKey™
with Remote Start Systems section.