Changing A Bulb - Ford 2013 Fusion Owner's Manual

Hide thumbs Also See for 2013 Fusion:

Table of Contents

5. Remove the lower three wheelhousing

6. Remove the three front bumper cover

lower fasteners, only on the side of

headlamp being serviced.

Separate the front bumper cover from

the fender, pull the fender outward 3

8. From the front of the vehicle, pull the

front bumper cover forward 10 cm.

9. Carefully pull the headlamp assembly

outward to disengage it from the lower

fixing point.

Carefully lift the headlamp and

remove from vehicle.

Disconnect the electrical connector.

CHANGING A BULB

Lamp Assembly Condensation

Exterior lamps are vented to

accommodate normal changes in pressure.

Condensation can be a natural by-product

of this design. When moist air enters the

lamp assembly through the vents, there is

a possibility that condensation can occur

when the temperature is cold. When