Frond Control&Connections - Philips DELLP1230 Service Manual

4 X DELL P1230 M25P XXX
Go to cover page
Front View
Note: The color of the monitor may vary
1 . Power button-Switches your monitor on
2. Power indicator-This light glows green during
normal operation and glows amber when in the
power saving mode.
3. Menu button-Activates the Main OSD menu
controls.
4 / .Contrast hotkeys - Pressing the UP button will
access the contrast menu
( CONTRAST control bar will appear on screen)
5. / Brightness hotkeys - Pressing the Down button
will access brightness menu.
(BRIGHTNESS control bar will appear on screen).
6.
/ These are also used for adjusting other functions in
the Main OSD Menu of your monitor.
Frond control & connections
1.
2.
Cable Connections On Back of Monitor and Computer
1.Turn off your computer and unplug its power cord.
2.Connect the blue connector of the signal cable to the blue
graphics port on the back of your computer
Tighten thumb screws finger tight only. Do not over tighten.
3.Connect the other end of the signal cable to the graphic port
1 or 2 on the back of the monitor.
4.Fully insert the monitors power cord into the power port on
the back of the monitor.
5.Plug the power cords of your computer and your monitor into
a nearby outlet.
6.Turn on your monitor and computer.
Power port
D-SUB graphics port 1 & 2. (Connector)