Advertisement
The GREEN and yellow wire must be
connected to the terminal in the plug
marked by 'E' or the earth symbol
4r,
or
coloured green or green and yellow.
Before replacing the plug cover, make
certain that the cord grip is clamped over
the sheath of the lead - not simply over
the three wires.
Positioning/Ventilation
In order to prevent overheating, ensure
that the ventilation openings in the monitor
are not covered.
The monitor should not be placed near a
source of heat nor on a soft surface since
this would block the ventilation slots on
the bottom.
Movable support
You can tilt the monitor into a convenient
position with regard to the computer by
using the movable support.
It is also possible to fit the monitor with a
type SBC 482 pedestal. This is available
from your monitor dealer.
The pedestal enables you to place the
monitor into a convenient position by
tilting and/or turning the monitor.
Connection to the mains
You can connect your monitor to a mains
voltage of between 220 and 240 V. If the
mains voltage in your home is different
from this, consult your dealer.
Connecting the computer
The monitor is fitted with two Phono
sockets for audio and video (CVBS) input.
In addition to this, the monitor is fitted with
a Euroconnector. See the Euroconnector
specifications for the connections.
Connection cable type AV7117 0001 is
supplied with monitor VS 0060/00.
Using this cable the Phono socket on the
monitor can be connected to the DIN
socket on the Philips MSX computer.
A connection cable type
av
nzuuuui is
supplied with monitor VS 0080/00.
Using this cable the Euroconnector socket
on the monitor can be linked to the
Euroconnector socket on your Philips
MSX-2 computer.
In most cases when you wish to connect
your monitor with a different home or
personal computer it will not be possible
to use the connection cable supplied.
Connection cables for most types of home
or personal computers are available from
your monitor dealer.
Connections (rear panel)
—
a
*
OO
CVBS IN (Phono type) CD
CVBS input (composite signal) of the
Phono plug type.
For connection of a computer or other
CVBS sources.
AUDIO IN (Phono type) J1
For connection of a signal source with a
sound (audio) signal output.
c
D
CVBS + RGB linear + Audio input +
Status RGB (Euroconnector type)
For connection of a Video Recorder,
Computer, LaserVision Player, TV Tuner,
etc. equipped with a Euroconnector.
Remarks:
It is not possible to connect two video
sources to the monitor simultaneously
because this will result in interference in
the picture.
2
Advertisement
