JVC TH-A5 Service Manual page 10

TH-A5
Removing the DVD traverse mechanism
Prior to performing the following procedure, remove
the top cover, DVD mechanism assembly, DVD
loader board and DVD loading mechanism.
1. Remove the four screws D attaching the DVD
traverse mechanism to DVD loading mechanism.
Removing the holder & DVD MPEG board
Prior to performing the following procedure, remove
the top cover, DVD mechanism assembly and DVD
loader board.
1. Remove the two claws1, and remove the holder from
the DVD mechanism assembly as it is pushed down.
Note: When removing only the DVD MPEG board, it is not
necessary to remove this holder.
2.
Remove the four claws2 and remove the DVD
MPEG board from the holder.
ONE POINT
When inserting DVD MPEG board in
holder.
Insert in after uniting with a lower claws,
when inserting DVD MPEG board in holder.
1-10
(See Fig.5)
DVD traverse
(See Fig.6 and 7)
(see fig.8)
mechanism
D
Fig.5
Holder
Claw1
Fig.6
Holder
DVD MPEG board
Fig.7
DVD MPEG board
Holder
DVD loading mechanism
(top side)
D
DVD mechanism assembly
(bottom side)
Claw2
Fig.8