Operating Instructions
Additional Feature table
The features described below are added in accordance with our modifications in
the product specifications. Read both Operating Instructions manuals before
starting to use the product.
Viewing Buffered Image Screen
Images can be buffered in the internal memory of the Network
Camera. They can be viewed by clicking [Start Capture] on
Capture screen. Alarm/Timer mode in the Image Transfer on
page 12 can also buffer images.
Viewing still images on your mobile phone
A compatible mobile phone allows you to view still images over
the Internet as well as control the motion and zoom settings of
the camera (depends on model).
Some changes in the look of the Network window
(KX-HCM250 and KX-HCM270 only)
The Network Camera has some changes in the look of the
Network window: two modifications and two additions.
Adjusting Clock for Daylight Saving Time
Adjust Clock for Daylight Saving Time is added on Name/
Time window.
Time Zone at Auto Adjustment
The Daylight Times in the pull-down menu for the Time Zone
at [3. Auto Adjustment] on Name/Time window have been
deleted.
Transferring Camera Images
The Network Camera can buffer images and send them via E-
mail or FTP by configuring Image Transfer. Capture, Alarm
and Timer can be used simultaneously by checking [Enable]
for Controls on each of their Image Transfer windows.
Using the Preset Control (Except KX-HCM8)
Pan/Tilt/Preset Control on the Camera Setup window is
divided into two controls: Pan/Tilt Control and Preset Control.
Preset Control can be enabled or disabled independently.
2
Additional Feature
Page
Page 4—Page 5
Page 6—Page 7
Page 8—Page 9
Page 10
Page 11
Page 12—Page 14
Page 15