Installing The Display Panel; Removing The Display Assembly - Dell Latitude E6530 Owner's Manual

5. Peel off the LVDS cable connector tape and disconnect the LVDS cable from the display panel.
6. Remove the display panel from the display assembly.

Installing the Display Panel

1. Connect the LVDS cable and stick the LVDS cable connector tape.
2. Flip the display and place it in the display assembly.
3. Tighten the screws to secure the display panel to the display assembly.
4. Install:
a) display bezel
b) display assembly
c) battery
5. Follow the procedures in

Removing the Display Assembly

1. Follow the procedures in
2. Remove:
50
After Working Inside Your Computer .
Before Working On Your Computer .