Oki OKIOFFICE 84 Service Manual page 137

Table 2.9.4 (4/5) User's Initial Settings (One-Touch Key Program)
F+OT Item
No.
9 2. Dial parameters
9 3. Clock adjustment
9 4. System data program
5. Personal box programming
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
Refer to Table 2.9.6 for specification of dial parameter
settings.
Date and time adjustment.
(1) TSI/CSI (except for SUI and AUT)
Registration of TSI/CSI/CIG (numbers, + and space) in
20 digits.
TSI: Transmitting Subscriber Identification
CSI: Called Subscriber Identification
CIG: Calling Subscriber Identification
(2) SENDER ID
Registration of sender ID (alphabetic, numeric and
symbolic) in 32 digits.
(3) CALL BACK NO.
Registration of telephone number for call-back
message (alphabetic, numeric and symbolic) in 20
digits.
To allow the operator (in this case, a person who
wishes to assign a password to personal box) to
assign a two functions to 8 personal-box.
(a) Confidential RX
(b) Bulletin Polling TX
Used with confidential RX and Bulletin polling TX and
Advanced T30 protocol. Personal box setting for
Bulletin poll using SEP frame and Confidential using
SUB frame when remote machine has a SEP/SUB
capability.
The box No. 0 is used for only global Bulletin Polling
TX.
Page: 75