Oki OKIOFFICE 84 Service Manual page 131

Table 2.9.4 (1/5) User's Initial Settings (One-touch key Program)
F+OT Item
No.
1 Delayed transmission (TX)
2 Print from Message in Memory
(Print Memory MSG)
2 Print from Confidential Reception
Message (Print Personal Box)
3 Confidential transmission
4 Relay broadcast initiate
transmission
Service Guide OKIOFFICE 84
Chapter 2 Installation
Specifications
This function enters a message transmission time(s)
and location(s) for execution at a specified time. 5
specified times can be registered (within 3 days).
To print out the received messages from memory in
"MSG. IN MEMORY" mode, or when the machine has
run out of recording paper (including the door open
and no toner state). When received
messages are in the memory. "MSM. IN MEMORY" is
indicated on the LCD. When printing in the Memory
Only Reception, an operator has to print the received
message by the Memory message printing operation.
To print out the confidential received messages in the
memory with 1-digit personal box number.
The maximum number of personal boxes is 8.
Personal boxes are numbered 1 to 8. When
confidential received messages are in the
memory, "MESSAGE IN MEMORY" is indicated on the
LCD.
This function transmits a Confidential-marked
message to any one of 64 predesignated mailboxes
provided in a distant machines.
To program the mail box number 01 to 64. Available
remote station's mail box numbers:
OKIFAX 2400/2600: 01 to 40
OKIFAX 1000: 01 to 16
OKIFAX 2300: 01 to 16
OKIFAX 2350/1050: 01 to 08
OKIFAX 2450: 01 to 16
OKIFAX 5300: 01 to 08
OKIFAX 5600: 01 to 16
OKIOFFICE 84: 01 to 08
This function automatically originates a message call
via relay key station which must be equipped with
OKIFAX 2600, up to 120 locations for OKIFAX 2600.
To program relay password.
To enable or disable the relay report.
When auto dial code number 70 is not assigned, relay
broadcast report is not transmitted. When it is
assigned, relay report is transmitted to fax number
assigned to auto dial code 70.
Page: 72