Removal Steps; Installation Steps; Removal, Installation & Maintenance Of Rear Bumper; Preparations - Chery A113 Maintenance Manual

4. Installation Steps

The installation steps are reverse to those for removal.
II. Removal, Installation & Maintenance of
Rear Bumper

1. Preparations

Tools: cross head screwdriver, flat head screwdriver, No.8 sleeve.
Spare parts: disposable clips.

2. Notes

2.1. Please wear necessary labor protection supplies to avoid
accidents.
2.2. Try to avoid scratching the painted surface of the bumper when
removing it.
2.3. When removing the bumper in colder environment, operate
gently to avoid damaging it.

3. Removal Steps

3.1 Disassemble the tail lights. (See Removal and Installation of Tail
Lights)
3.2. Open the trunk cover, and use a cross head screwdriver to
loosen off the four fixing clips on the rear bumper.
3.3. Use a cross head screwdriver to loosen off the three clips fixing
the rear bumper bottom and the vehicle body.
Note: Raise the vehicle with a hoister.
3.4 Use an 8# torque wrench to loosen the screws connecting the
wing sheet and the bumper.
Note: Two fixing screws on either side.