4.1.2. Loosen off the three screws and washers behind the control
panel that control defroster, blowing head, blowing foot and control
arm.
4.2. Installation Steps
The installation steps are reverse to those for removal.
5. Removal and Installation of Blend Throttle Related
Mechanism
5.1. Removal Steps
5.1.1. Remove the blend throttle bar, and use a cross head
screwdriver to loosen off the screws on the control panel.
5.1.2. Use a flat head screwdriver to pry off the control arm.
5.1.3. Remove the blend throttle.
5.2. Installation Steps
The installation steps are reverse to those for removal.