Factory Settings - Mercedes-Benz Audio 10 Operating Instructions Manual

Adjusting the sound settings
Press the u button.
X
The display shows the current sound
settings.
Select Treble Treble, Bass, Bass
X
with the 9 or : button.
Adjust the sound with the = or ;
X
button.
The long bar shows the current setting. The
short bar shows the most recently stored
sound setting.
To exit sound settings: press the %
X
button.
Audio 10 stores the new sound settings.
Setting the language
As standard, Audio 10 uses the language set
in the on-board computer. You can also set
the language independently of the on-board
computer.
To select the system menu: press the
X
i button and confirm with 9.
Language Language is selected.
Press the 9 button to confirm.
X
The display shows a list of available
languages. The # dot marks the currently
set language.
Balance Balance or Fader Fader
To select a language: use the : button
X
to select the desired language and confirm
with 9.
Audio 10 display texts are shown in the
selected language.
Or
Press the 9 button to select
X
Synchronize Languages Synchronize Languages.
Audio 10 display texts are shown in the
selected language on the on-board
computer.
To exit the system menu: press the
X
$ or Õ button.
Resetting to factory settings
You can reset the settings of Audio 10 to the
factory settings. This will delete all personal
data (station memory, phone book etc.).
i
Resetting to factory settings is useful
when you sell the vehicle, for example.
To select the system menu: press the
X
i button and confirm with 9.
Use the : button to select
X
confirm with 9.
A prompt appears in the display asking
whether the data should be deleted.
Use the = or ; button to select
X
Yes Yes or No No and confirm with 9.
If Yes Yes has been selected, a second prompt
appears in the display asking whether the
data should be deleted.
Basic functions
Reset Reset and
15