Switching Wavebands; Calling Up Stored Stations - Mercedes-Benz Audio 10 Operating Instructions Manual

To select Autostore: press the : or
X
9 button to select
confirm by pressing the 9 button.
Audio 10 searches for the 10 stations with
the strongest signal and stores them.
To cancel storage: during storage, press
X
the 9 button.
To exit the preset menu: using the :
X
button, select one of the stored stations
and confirm by pressing the 9 button.
Or
Press the % button.
X
i
If the process is interrupted by a traffic
report, you must repeat it.

Calling up stored stations

Calling up stations using the number
keypad
Press the $ button to select the desired
X
waveband.
Briefly press a number button from x to
X
s.
You will hear the station stored in the
selected preset, if it is receivable.
Calling up stations using the station list
Autostore Autostore and

Switching wavebands

Press the $ button to select the desired
X
waveband.
To select the preset menu: press
X
the : button, select
= or ; buttons and confirm by
pressing the 9 button.
The display shows a list of the stored
stations.
The # dot indicates the station being
currently played, if the station has been
stored.
To select a station: using the : or
X
9 buttons, select a station and confirm
by pressing the 9 button.
You will hear the station stored in the
selected preset, if it is receivable.
Switching wavebands
Audio 10 can receive the following
wavebands:
Waveband
FM (VHF)
MW (medium wave) 530 – 1710 kHz
Press the $ button repeatedly until the
X
display shows the desired waveband.
Or
To select the waveband menu: press
X
the : button, select the waveband in
the menu bar using the = or ;
buttons and confirm by pressing the 9
button.
The display shows a list of wavebands.
The # dot indicates the waveband
currently called up.
To select a waveband: select a waveband
X
using the : or 9 buttons and
confirm by pressing the 9 button.
Presets Presets using the
Frequency
87.7 – 107.9 MHz
19