Charging The Battery; Inserting/Removing The Battery And Memory Card - Ricoh Pentax K-S1 Start Manual

Charging the Battery

1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Battery charger
3
Face the A mark on the
battery up, and insert it into
the battery charger.
Insert the battery into the battery
charger at an angle, and then
fit into place.
The indicator lamp is lit while
charging and turns off when
the battery is fully charged.
(Approximate maximum charging
time: 240 minutes)
Indicator lamp
AC plug cord
Inserting/Removing the Battery and Memory
Card
1
Open the battery/memory
card cover.
Slide the battery/memory
card cover unlock lever (1)
before opening the cover.
2
Face the A mark on the
battery towards the lens,
and insert the battery until
it locks into place.
To remove the battery,
push the battery lock lever
in the direction of 2.
3
Insert the card all the way
into the memory card slot
with the memory card label
facing toward the monitor.
Push the memory card in once
and release to remove.
1
2
21