Channel Settings; Additional Search; Manual Adjust; Auto Installation - Sharp AQUOS LC-60LE830M Operation Manual

Basic adjustment

Channel settings

Go to "Menu" > "Setup" > "View setting".
CH list
:Enter :Back
View setting

Auto installation

The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting and reconfigure the settings
after the initial auto installation has been completed.
1
Go to "Menu" > "Setup" > "View setting" > "Auto
installation".
2
If you have already set the password, enter it here.
• See page 30 for setting a password.
3
Press c/d to select "Yes", and then press
A.
4
Press a/b/c/d to select the desired language,
and then press A.
• You do not need to do anything during the auto search.
NOTE
• You cannot set the Home/Store setting and the country
setting in "Auto installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.
• The current country setting is displayed on the screen.
View setting

Programme setup

You can reconfigure the TV channel settings
automatically or manually.
1
Go to "Menu" > "Setup" > "View setting" >
"Channel settings" > "Programme setup".
2
If you have already set the password, enter it here.
• See page 30 for setting a password.

Additional search

Use this menu to add new services automatically after
"Auto installation" has been completed.
• Start searching channels after selecting the colour system
and sound system.
28
Menu
Setup
View setting
Auto installation
Channel settings
Quick start
Individual setting

Manual adjust

Use this menu to set up the TV channels manually.
After selecting "Yes" on the screen, press a/b/
c/d to select the channel you want to set and
then press A.
Programme Setup "Manual Adjust" menu
You can select one of the following settings.
Search (Page 28.)
1
Fine (Page 28.)
2
Colour sys. (Page 28.)
3
Sound sys. (Page 28.)
4
Search
You can add a new channel within a specified frequency
band.
Next
Search the next channel.
Store
Memorise the current display channel.
Return to the previous screen (the search
Cancel
result will not be stored).
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a reference.
• Instead of pressing c/d to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0_9 numeric buttons.
• When setting a frequency on the "Fine" screen, the last figure
of the frequency needs to be "0" or "5".
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > A.
Colour sys.
Select the optimum colour system to receive ("Auto",
"PAL", "SECAM", "NTSC3.58", "NTSC4.43").
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive ("B/G", "D/K", "I", "M").
NOTE
• Check the sound system if the sound output were not
correct.
Next
Label (Page29.)
5
Skip (Page 29.)
6
Lock (Page 29.)
7
Item