Table of Contents
Advertisement
Channel
This option allows you to tune in your set to the incoming RF or Satellite signal. You can confi gure the
settings related to the type of broadcast being received. To enter this menu option, select the
while on the Home Page or press the [MENU] button on the remote control when in television mode, then
go to Settings > Channel. When selected, the options shown below are available:
There are three types of signal which can be tuned into, reception of
these are dependent upon the signals being received by your set and the
country you are located in:
•
Digal Terestrial Television – Also known as DVB-T1 and/or DVB-T2.
•
Cable Televison – Also known as DVB-C.
•
Satillite Television – Also know as DVB-S1 and/or DVB-S2.
Options in the channel menu are:
Channels
Tune and control channels.
Channel Installation Terrestrial, cable or satellite.
Mode
Auto Channel
Update channels automatically, on/off.
Update
Channel Update
Advise when channel update is available, on/off.
Message
Parental Controls
Set parental levels.
Audio Language
Set the audio language track.
2nd Audio
Set the secondary language track.
Language
Open Source
View the licences online.
Licences
Version
Software version.
Before tuning in your set, you will need to select the type of signal
being received to enable tuning to operate correctly. Enter the Channel
Installation Mode to choose Antenna (terrestrial digital television), Cable
or Satellite.
Depending upon which option is selected will change the options
available in the Channels menu as shown in the following pages.
Android Functionality
icon
47
47
Advertisement
Table of Contents
