Functional Description; Intended Use; Product Features - Bosch 14,4 V Original Instructions Manual

OBJ_BUCH-639-002.book Page 17 Friday, December 4, 2009 2:00 PM
Do not reach into the saw dust ejector with
your hands. They could be injured by rotat-
ing parts.
Apply the machine to the workpiece only
when switched on. Otherwise there is dan-
ger of kickback when the cutting tool jams in
the workpiece.
When working, always hold the planer in
such a manner that the planer base plate fac-
es flat on the workpiece. Otherwise the plan-
er can become wedged and lead to injuries.
Never plane over metal objects, nails or
screws. The planer blade and the blade shaft
can become damaged and lead to increased
vibrations.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
Use only original Bosch batteries with the
voltage listed on the nameplate of your pow-
er tool. When using other batteries, e. g. imi-
tations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batteries.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for planing of firmly
supported wooden materials, such as beams
and boards. It is also suitable for beveling edges
and rebating.
Bosch Power Tools

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Chip ejector (alternatively right/left)
2 Depth adjustment knob (insulated gripping
surface)
3 Planing depth scale
4 Chip ejection selector lever
5 Lock-off button for On/Off switch
6 On/Off switch
7 Battery*
8 Battery unlocking button
9 V-grooves
10 Planer base plate
11 Handle (insulated gripping surface)
12 Blade drum
13 Clamping element for blade
14 Fastening screw for planer blade
15 Carbide blade (TC)
16 Allen key**
17 Extraction hose (Ø 35 mm)*
18 Chip/dust bag*
19 Parallel guide*
20 Scale for rebating width
21 Locking nut for adjustment of rebating
width
22 Fastening bolt for parallel and beveling
guide
23 Angle stop*
24 Locking nut for angle adjustment
25 Fastening bolt for rebating depth stop
26 Rebating depth stop*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
**Commercially available (not included in the deliv-
ery scope)
2 609 932 745 | (4.12.09)
English | 17