Set Mode 3 - Set Text Scrolling Speed (1-4); Set Mode 4 - View Device Id; Factory Reset Of Wireless Display - La Crosse Technology WD-3303 Owner's Manual

5.
6.
7.
NOTE: You can silence an Acoustic Weather Warning by pressing any Key.

Set Mode 3 - Set Text Scrolling Speed (1-4)

8.
9.
10.
11.
12.

Set Mode 4 - View Device ID

NOTE: Device ID is a reference item for customer service only. You may press
the "SET" Key again to exit SET mode if you are not asked to provide this
number by customer service.
13.
14.
15.
16.

Factory Reset of Wireless Display

NOTE: It is not possible to re-register a previously registered Wireless Display under a new
account until the Wireless Display has been deleted from the user account on
www.weatherdirect.com
NOTE: Expansion Options that are Lifetime Upgrades are still active on your Wireless
Display even if you delete it from your user account on
a Factory Reset. The selection of locations and other custom settings will need to be
performed again if the Wireless Display is re-registered.
WARNING: The Factory Reset procedure will erase any registration and setup information
from your Wireless Display. You must register the Wireless Display again with
www.weatherdirect.com
WARNING: Deleting the Wireless Display from a user account on
will erase the weather and other setup information such as forecast locations from the
Wireless Display.
If you have trouble registering your Wireless Display after multiple attempts, you can try a Factory
Reset.
Press the "SET" Key until "AAL
and "ENABLE ACOUSTIC WEATHER WARNINGS" scrolls across the
bottom
Press the "+" Key to turn AAL "ON" or "OFF"
Press the "SET" Key to save the current settings and advance to the next
option
Press the "SET" Key until "Scr" flashes at the top and "SET SCROLL
SPEED" scrolls across the bottom
The standard speed is set to "2"
There are four speeds available – "1" is the slowest and "4" is the fastest
Press the "+" Key to change the scroll speed.
Press the "SET" Key to save the current settings and advance to the next
option
Press the "SET" Key until "SEC 1" appears at the top
The first part of the Device ID will appear at the bottom
Press the '+" Key to view second part of the Device ID under "SEC 2"
Press the "SET" Key to exit SET mode
and a Factory Reset has been performed.
to use it after a Factory Reset.
Page 17 of 24
Version 2 - 12/22/2011
ON" or "AAL OFF" flashes at the top
www.weatherdirect.com
www.weatherdirect.com
or perform