Table of Contents
Advertisement
The Four SET modes are:
Set Mode 1 – Set LCD Contrast (0-7)
Set Mode 2 – Enable Acoustic Weather Warnings (ON/OFF)
NOTE: In addition to the scrolling text of the Severe Weather Alerts, an Acoustic
Weather Warning provides a beep to notify you of a weather condition. You can
turn this beep off to silence this warning so only the text of the warning is
displayed. To change the setting, follow the instructions below:
NOTE: You can silence an Acoustic Weather Warning by pressing any Key.
Set Mode 3 - Set Text Scrolling Speed (1-4)
Set Mode 4 - View Device ID
NOTE: Device ID is a reference item for customer service only. You may press
the "SET" Key again to exit SET mode if you are not asked to provide this
number by customer service.
Press and Hold the "SET" Key until the Wireless Display beeps to enter
the SET mode
"LCD" and number (0-7) will flash near the top. "SET LCD CONTRAST"
will scroll across the bottom
Press the "+" Key to update the LCD Contrast settings.
Lightest Contrast = "0", Darkest Contrast = "7"
Press the "SET" Key to save the current settings and advance to the next
option
Press the "SET" Key until "AAL
and "ENABLE ACOUSTIC WEATHER WARNINGS" scrolls across the
bottom
Press the "+" Key to turn AAL "ON" or "OFF"
Press the "SET" Key to save the current settings and advance to the next
option
Press the "SET" Key until "Scr" flashes at the top and "SET SCROLL
SPEED" scrolls across the bottom
The standard speed is set to "2"
There are four speeds available – "1" is the slowest and "4" is the fastest
Press the "+" Key to change the scroll speed.
Press the "SET" Key to save the current settings and advance to the next
option
Press the "SET" Key until "SEC 1" appears at the top
The first part of the Device ID will appear at the bottom
Press the '+" Key to view second part of the Device ID under "SEC 2"
Press the "SET" Key to exit SET mode
Page 16 of 24
Version 3 - 12/22/2011
ON" or "AAL OFF" flashes at the top
Advertisement
Table of Contents
