Table of Contents
Advertisement
View Outdoor Temperature
Press the "+" Key to view the current outdoor temperature from your synchronized
•
wireless outdoor sensor. Pressing the "+" Key will also cycle through the date,
seconds and indoor temperature on the top segment of the LCD.
Manually Request a Weather Direct® Data Update
When you register your Wireless Display, the weather data is updated within a few
•
minutes. Every 6 hours after that, your Gateway will send weather data to update
your Wireless Display.
After changing the forecast location or other setting on the web site, it can be up to
•
six hours for your next scheduled automatic update.
After adding an Expansion Option to your Wireless Display, it can be up to six hours
•
for your next scheduled automatic update.
If you do not want to wait for your Wireless Display to update automatically, Press
•
and Hold the "+" Key for 3 seconds until your Wireless Display beeps once. A second
beep within a few seconds will signify that the Wireless Display has received the
data.
When ADD 4 LOCATIONS Expansion Option is Active
Press the "SET" Key to toggle between the forecast locations on the Wireless Display when the
ADD 4 LOCATIONS Expansion Option is active. The name of the location will appear briefly on
the bottom of the LCD when it is selected. Weather data for up to 5 locations can be viewed on
your Wireless Display.
Changing Settings on Your Wireless Display
Press and hold the "SET" Key until the Wireless Display beeps to enter the SET mode. Press the
"SET" Key to toggle through the four SET modes. If you wait for 5 seconds without pressing a
key, the Wireless Display will exit the SET mode and return to normal operation.
The Four SET modes are:
Set Mode 1 – Set LCD Contrast (0-7)
1.
2.
3.
4.
Set Mode 2 – Enable Acoustic Weather Warnings (ON/OFF)
NOTE: In addition to the scrolling text of the Severe Weather Alerts, an Acoustic
Weather Warning provides a beep to notify you of a weather condition. You can
turn this beep off to silence this warning so only the text of the warning is
displayed. To change the setting, follow the instructions below:
"SET" Key
Press and Hold the "SET" Key until the Wireless Display beeps to enter
the SET mode
"LCD" and number (0-7) will flash near the top. "SET LCD CONTRAST"
will scroll across the bottom
Press the "+" Key to update the LCD Contrast settings.
Lightest Contrast = "0", Darkest Contrast = "7"
Press the "SET" Key to save the current settings and advance to the next
option
Page 16 of 24
Version 2 - 12/22/2011
Advertisement
Table of Contents
