SMC Networks EZ Connect SMC2642W User Manual page 23

About
The About tab shows driver and utility version of the SMC2642W Wireless
Compact Flash Card.
Caveat
n Due to WinCE's nature of the first application at power-on resuming to that at
power-off, if you are stuck at the utility program, you may use the PDA's reset
button to terminate it. And then activate it again when needed.
n Sometimes, your wireless connection to AP may disconnect for any reason.
You can reset and force a connection request by going to utility program, then
select "Configuration", check parameters, then select "Apply" to force a
re-scan.
n If your device roams to a new AP which is in a different subnet, you may need
to remove and re-insert the Wireless LAN Compact Flash Card to force an
execution of "release and renew" of an re-assignment of IP address in a DHCP
Access Point environment.
-18-