SMC Networks EZ Connect SMC2642W User Manual page 11

2-2 Install the SMC2642W Wireless Compact Flash Card
1. Connect the SMC2642W 11Mbps Wireless Compact Flash Card to your PDA.
The PDA will auto-detect the Wireless LAN Compact Flash Card and
automatically install the corresponding driver.
2. Assign an IP address to your Wireless LAN Compact Flash Card. You may
either set the Wireless LAN Compact Flash Card to obtain an IP address from
your DHCP server, or to be assigned with a fixed IP address.
3. Reset your PDA.
Upon completion of installation, the Wireless LAN Compact Flash Card will start
to look for an Access Point with Green LED blinking. The Green LED will stay
steady once the Wireless LAN Compact Flash Card successfully associates with
an Access Point. To configure the Wireless LAN Compact Flash Card, please
proceed to the next chapter " Using SMC2642W Wireless Compact Flash Card".
-6-