Using Cable Ties - Fujitsu PRIMERGY TX2540 M1 Operating Manual

5.5.1

Using cable ties

You can secure the power cords using a cable ties to ensure that the insulated
connector cannot be disconnected from the server accidentally. The cable ties
are included in the accessories pack that is delivered together with the server.
Figure 4: Using cable ties (example hot-plug PSU)
Ê Thread the cable tie through the eye (1).
Ê Pull the cable tie tight to secure the power cord.
The insulated connector cannot now be disconnected from the server
accidentally.
You can loosen the cable tie by opening the small locking lever (2).
TX2540 M1
Operating Manual
Hardware installation
59