Connecting Devices To The Server - Fujitsu PRIMERGY TX2540 M1 Operating Manual

Hardware installation
5.4

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "FUJITSU Server PRIMERGY
TX2540 M1 Server Upgrade and Maintenance Manual".
Figure 2: Connection panel on the rear
1 Serial connector COM1* (turquoise) 4
2 Video connector (blue)
3 Management LAN connector
* The serial interface COM1 can be used as the standard interface or for
communication with iRMC S4.
The corresponding indicators are explained in section
page 73.
I
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Ê Connect the devices.
56
Standard LAN connector
5 4 USB connectors (black)
6 Shared LAN connector
Operating Manual
"Rear of server" on
TX2540 M1