Panel Facilities - Pioneer VSX-50 Service Manual

5

8. PANEL FACILITIES

Front panel
1 2
STANDBY/ON
PULL-
OPEN
1 Front panel connections cover
Pull where indicated to access the front panel
connections (SETUP MIC/PHONES jack, FRONT INPUT
jacks).
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
4 AUTO indicator
Lights when Auto audio format decoding is selected.
5 Listening mode indicators
2 PRO LOGIC II indicator
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
NEO:6 indicator
Lights when the Neo:6 listening mode is active with a
2 channel (stereo) source.
ADVANCED indicator
Lights when one of the Advanced Surround modes is
active.
PHONES indicator
Lights when phones surround mode is active.
SOUND MODE indicator
Lights when one of the Sound Modes is active.
6 Remote control sensor
7 INPUT SELECTOR knob
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
5
6
3 4
2 2
DIGITAL DTS AUTO PRO LOGICII NEO:6
8
Use to adjust the volume.
VSX-50
6
7
5 6 7
ADVANCED PHONES SOUND MODE
MASTER VOLUME knob
7
8
8
MASTER
INPUT SELECTOR VOLUME
DOWN UP
99
8
A
B
C
D
E
F