Remote Control - Pioneer VSX-50 Service Manual

5

Remote control

Function names printed in gold on the remote control are
receiver-related functions. Function names printed in
blue are for the built-in tuner (See Using the tuner),
and those in red control the DVD player. Other
functions relate to other equipment that you can control
using this remote. See also Controlling other equipment.
1
RECEIVER
OPEN/CLOSE
3
SYSTEM OFF
6
RECEIVER DVD
SLEEP
8
TV/SAT
AUDIO SUBTITLE
10
AUTO STEREO
11
SOUND
MODE
MUTE
13
MASTER
VOLUME
MCACC
14 SETUP
TUNE
DTV MENU
TOP MENU
ST
16
ENTER
HOME
MENU
TUNE
17 GUIDE
CH SELECT
BAND DTV ON/OFF
19
DISPLAY CL ASS
20
TV CONTROL
21
INPUT CHANNEL
DVD RECEIVER
5
6
2
4
5
7
DVR/VCR INPUT
9
FM/AM SIGNAL
ANGLE PLAY MODE
ADV ANCED
SURROUND
SURROUND
DIALOG SBch MODE
12
DISPLAY
RECEIVER
SETUP 15
T.EDIT
MENU
ST
RETURN
18
TEST TONE
MPX D.ACCESS
/ +10
CLEAR
ENTER
ZOOM
22
VOL UME CHANNEL
SURROUND
DIMMER
6
7
1 OPEN/CLOSE
See the DVD player's operating instructions.
2 LED
Indicates a remote control operation.
3 RECEIVER
Press to switch the receiver on or into standby.
4 SOURCE
Press to switch the current source component on or into
standby.
5 Input/remote control mode select buttons
When the Remote Direct function is set to on, these
buttons (except FM/AM) change the remote mode and
the receiver input simultaneously. When set to off, they
only switch the remote mode (see also Remote Direct
function).
DVD
Press to select DVD as the current input.
DVR/VCR
Press to select DVR/VCR as the current input.
TV/SAT
Press to select TV/SAT (set-top box) as the current
input.
FM/AM
Press to select FM/AM (the built-in tuner) as the
current input.
6 RECEIVER
Press to put the remote in 'receiver' mode (i.e., the
remote controls the receiver functions).
7 INPUT
Press to cycle through the various inputs. The current
input is shown in the front panel display.
8 SLEEP
Use to set the sleep timer.
9 SIGNAL
Press to select the type of input signal for the current
input (DVD, TV/SAT, DVR/VCR and FRONT).
10 DVD control buttons
See the DVD player's operating instructions.
11 Sound buttons
AUTO
Press to select the AUTO (default) sound for the
current source (stereo, Dolby Digital, DTS, etc.) and
switch off all other sound processing.
STEREO
Press to hear the current source in stereo.
SURROUND
Use to select a SURROUND mode for the current
source.
ADVANCED SURROUND
Use to select an ADVANCED SURROUND mode for
the current source.
MUTE
Press to mute all output. Press again (or adjust the
volume using the MASTER VOLUME control) to
restore the sound.
VSX-50
7
8
A
B
C
D
E
F
103
8