Honeywell T7350 User Manual page 26

T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
12. Make changes and tap "Next" to proceed to the Outputs
screen.
13. The Outputs screen facilitates changes to output
type(s).
NOTE: When configured with an extra stage of heat or
cool (using the auxiliary stage) the Outputs
screen shows nothing but this indication.
Fig. 27. Outputs screen.
14. Make changes and tap "Next" to proceed to the Fan
screen.
15. The Fan screen facilitates changes to:
a. Fan Switch (On or Auto).
b. Fan Operation (Conventional or Electric Heat).
c. Heat and cool extended operation.
Fig. 28. Fan screen.
16. Make changes and tap "Next" to proceed to the Weekly
Schedule screen.
NOTE: The only schedule days/times displayed are
those in the program. It is possible to have as
many as 4 event times per day for each day
(including holiday) programmed into each set.
17. The Weekly Schedule screen facilitates changes to the
program schedule:
a. Tap Modify. (See Fig. 30.)
b. Select a day to modify.
c. Make changes to:
63-2605—2
(1) Mode (see Fig. 31).
NOTE:To remove a given event, change Mode to
"None".
(2) Time (see Fig. 32).
d. Repeat step c for all events until changes are
complete for the given day.
NOTE: To copy a day schedule, check the appropriate
boxes, and click CopyDayTo. (See Fig. 33.)
e. Tap OK.
f. Type in a name for the new schedule.
g. Tap SaveAs.
Fig. 29. Weekly Schedule screen.
Fig. 30. Weekly Schedule modification screen.
Fig. 31. Weekly Schedule Mode modification.
26