Reset; Configure Parameters By Usb; Gprs Setting; 1Setting Up Apn - Garmin GPS301 User Manual

Gsm/gprs/gps watch gps tracker
Table of Contents

Advertisement

5.36 Reset

Send SMS "reset+password" to tracker, it will reply " reset ok", the GSM and GPS module of the tracker will
be reset.

5.37. Configure parameters by USB

Find the USB cable in the package to connect tracker with computer, open the memory of the tracker, find and
open the initial configuration file with notepad
Note: Correct password is needed every time you configure the tracker.

5.38.GPRS setting

User must send SMS via cell phone to set up APN,IP and port before starting GPRS.

5.38.1Setting up APN

5.38.1.1 APN standards for Access Point Name and differs from country to country. For more information about
the local APN, inquire with your local GPRS network operator.
5.38.1.2 Text the tracker a SMS "APN+password + Space + your local APN" via a cell phone and if succeeded
in setup, the tracker will return the message "APN OK".
5.38.1.3 e.g. send SMS command "APN123456 CMNET". If succeeded, "APN OK" is returned by the tracker
in SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile (One of GSM Operator in
china).

5.38.2 GPRS User ID and password Setup

5.38.2.1 In most countries, the user name and password involving GPRS login are not compulsorily necessary,
therefore, the entry can be skipped. For those countries requiring user name and password, please configure as
following:
5.38.2.2 Send SMS "up+password+space+user+space+password"If succeeded,
"user,password ok" is returned by the tracker in SMS.
5.38.2.3 For instance, send SMS "up123456 jonnes 666666" to the tracker, and if succeeded, the tracker returns
"user, password OK"
Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the
password for GPRS login.
5.38.3 IP and port setup
5.38.3.1 Send SMS as below via a cell phone: adminip +password + Space + IP Address + Space + Port
Number. If succeeded, "adminip OK" is returned by the device in SMS.
5.38.3.2 e.g, Send SMS command "adminip123456 202.104.150.75 9000" to the tracker device, If succeeded,
"adminip OK" is returned by the device in SMS.( 123456 is default password,202.104.150.75 is IP,9000 is
, operate according the instructions.
15

Advertisement

Table of Contents
loading

Table of Contents