Need More Help - BenQ FP241VW User Manual

If the LED is illuminated in orange, the power management mode is active. Press any key on the
computer keyboard or move the mouse. If that does not help, check the signal cable connectors. If
any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the
How to adjust the screen resolution on page 20
resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor running at
its native resolution. To have the optimal display performance of each type of input sources, you
can use the "Display Mode" function to set a proper aspect ratio for the input sources. See
Mode on page 43
The image is displaced in one direction:
Read the
How to adjust the screen resolution on page 20
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
• To unlock the OSD controls when the OSD is preset to be locked, press and hold the "ENTER"
key for 15 seconds to enter the "OSD Lock" option and make changes.
• Alternatively, you may use the
the "OSD Settings" menu (under SYSTEM), and all OSD controls will be accessible.

Need more help?

If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: Support@BenQ.com
46 Troubleshooting
Downloaded from ManualMonitor.com Manuals
for details.
t u
or
section and then select the correct
section and then select the correct
keys to select "OFF" in the "OSD Lock" submenu from
Display