Table of Contents
Advertisement
H. Position
V. Position
Display Time
OSD Lock
Press MENU to leave the OSD Settings menu.
DDC/CI*
Information
Reset All
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
44
How to adjust your monitor
Downloaded from ManualMonitor.com Manuals
Adjusts the horizontal
position of the OSD menu.
Adjusts the vertical
position of the OSD menu.
Adjusts the display time of
the OSD menu.
Prevents all the monitor
settings from being
accidentally changed.
When this function is
activated, the OSD
controls and hotkey
operations will be
disabled.
Allows the monitor
settings to be set through
the software on the PC.
Displays the current
monitor property settings.
Resets all mode, color and
geometry settings to the
factory default values.
t
u
Press the
or
keys to
adjust the value.
t
u
Press the
or
keys to
change the settings.
To unlock the OSD
controls when the OSD is
preset to be locked, press
and hold the 'ENTER' key
for 15 seconds to enter
the 'OSD Lock' option and
make changes.
Alternatively, you may
use the t or u keys to
select 'OFF' in the 'OSD
Lock' submenu under the
'OSD Settings' menu, and
all OSD controls will be
accessible.
Press the ENTER key to
select this option. Press the
t
u
or
keys to change the
settings.
Press the ENTER key to
select this option.
t
u
Press the
or
keys to
change the settings.
0 to 100
0 to 100
• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
• ON
• OFF
• ON
• OFF
• YES
• NO
Advertisement
Table of Contents
