Download Print this page
Commando FM-5005 COMBO Installation Manual

Commando FM-5005 COMBO Installation Manual

Remote auto alarm & remote starter system

Advertisement

Quick Links

LIMITED WARRANTY

This COMMANDO vehicle security
purchaser, to be free from defects in material and workmanship. The manufacturer
will repair or replace, at it's option, and free of charge during the first 12 months
of the warranty period, any part which prove defective in material or workmanship
under normal installation, use and service, provided the product is returned to our
factory, transportation charges prepaid. Products returned to our factory must be
accompanied by copy of purchase receipt. Warranty is limited to defective parts
and/or replacement parts only and excludes any incidental and consequential
damages connected therewith. The manufacturer, of this theft deterrent systems
makes no warranty against the theft of vehicle or its content. This warranty is not
to be construed as an insurance policy against loss.
After the first 12 months of the warranty period there will be a charge. ( required)
for repairing and/or replacing any defective parts.
WARRANTY ON INSTALLATION LABOR, REINSTALLATION AND REMOVAL CHARGES
ARE NOT THE RESPONSIBILITY OF THE MANUFACTURER.
NOTE:
ALL LCD 2 WAY REMOTE WARRANTY FOR 12 MONTHS
FROM DATE OF PURCHASE
OPTIONAL ACCESSORIES
Channel Expander
Glass Break Sensor
Interior Radar Sensor
Window Roll-Up Module
Trunk Release Solenoid
c 10-02
is
warranted to the original consumer
COMMANDO
Vehicle Security
FM-5005 COMBO
REMOTE AUTO ALARM & REMOTE
STARTER SYSTEM
INSTALLATION MANUAL
Alarm Features
One 5 Button Two Way LCD Display Withe Pager Remote
One 5 Button Code Hopping Remote Controls
Built-In Side-Light Relay Programmable (+/-)
Plug-in user programmable Coded Override Switch
Plug-in Dual-Zone Dual Adjust Piezo Sensor
Horn Output
Remote Door Locking/Unlocking with positive & negative outputs
Passenger Unlock Output
Two Auxiliary Channels with Selectable Output Types, ( Pulsed, Timed or Latched )
User-Selectable Auto-Arming
User-Selectable Auto-Rearming
Remote Panic with Smart Locking/Unlocking
User-Selectable AutoLock - Instant or RPM dependant
Remote Keyless Entry and Accessory Activation Even in Valet Mode
Remote-Controlled Courtesy Lighting
Pre-wired LED, Sensor, and Valet Switch Connectors
Auto Activation of Auxiliary 2 Output
Auto Disarm with Auxiliary 1 Activation (Trunk Release Output)
Smart Remote Trunk Release
Alarm Trigger Identification
Starter Features
True RPM Sensing for Real Time Cranking
RPM Learning Indication
Dual Mode reliable Smart Engine Run Sensing (Tackles Mode Only)
Gas or Diesel Mode with glow plug input
Cold Start Timer (Programmable)
Dedicated Starter Active Output for factory transponder bypass
Starter Disable Output for Anti Grind feature
Factory Disarm Output
Factory Rearm Output
Two Ignition Relay Outputs
Stop & Go Mode
Selectable Engine Run Time
MADE IN USA

Advertisement

loading

Summary of Contents for Commando FM-5005 COMBO

  • Page 1: Limited Warranty

    COMMANDO LIMITED WARRANTY Vehicle Security This COMMANDO vehicle security warranted to the original consumer purchaser, to be free from defects in material and workmanship. The manufacturer FM-5005 COMBO will repair or replace, at it's option, and free of charge during the first 12 months...
  • Page 2: System Contents

    SYSTEM CONTENTS SYSTEM DIAGNOSTIC INTRUSION ALERT Each system contains the following components: If a sensor input (door switch, shock sensor) has been violated while the system was armed, upon disarming the alarm system, the siren will confirm with 3 disarming siren chirps and 3 1- Brain Module light flashes indicating the alarm had been tripped.
  • Page 3: Programming The Unit

    PROGRAMMING THE UNIT TRANSMITTER BUTTON OPERATION FEATURE PROGRAMMING MODE IMPORTANT: The microprocessor alarm system has been designed so that upon arming, 1- Turn Ignition key ON Sensor 1 & 2 triggers will be delayed for 10 seconds. This is to give the electronics in the 2- Within 10 seconds press VALET switch 5 times.
  • Page 4 ALARM SPECIAL FEATURES TWO WAY FM REMOTE OPERATION PROGRAMING TRANSMITTERS TWO WAY FM PAGER PROGRAMMING Turn the ignition key 3 times on/off; leave the ignition key in ON position, within 3 seconds siren will chirp 3 times. Installing the Two Way FM Pager requires teaching the Alarm system the FM pager interface Press valet switch for 5 seconds the siren will chirp 5 times and LED comes on solid, then press module ID code.
  • Page 5: Transmitter Functions

    TRANSMITTER FUNCTIONS REMOTE START FEATURES ENGINE RPM PROGRAMMING TRANSMITTER FUNCTIONS WITH DEFAULT SETTINGS Select Engine Start RPM detection - step 20 in the programming table. Button # 1 upper left button (arm with chirps and press 3 seconds for panic) With engine running select step 21 in the programming table, note that the LED is Button # 2 upper right button (disarm with chirps and press one more time for passenger unlock) blinking, indicating that the RPM signal is detected properly, press button 1 on your...
  • Page 6 REMOTE ALARM & STARTER WIRING 1-GREEN/WHITE:---- Connect to the Brake light switch (+) when Brake is pressed. 2-BLACK/GRAY----- RPM Input Wire Tachometer. 3-RED/WHITE:------- Aux 2 Output (-) (Trunk) Dome Light Output (-) 4-BLACK/WHITE:--- Connect to Ignition switch wire which is powered by 12V.+ even on cranking. 5-YELLOW:--------- Glow plug Input (+) 6-BLUE/YELLOW:--...